Product Categories

Contact Us

Address: No. 837, Xingshan Town, ETDZ, Jinzhou City, Liaoning Province, China

TEL: 86-416-7996209

FAX: 86-416-7996210



Home > Knowledge > Content
Safety operation rules for rail cutting machine Jun 08, 2018
Safety operation rules for rail cutting machine

1.The operator must be familiar with the performance of the equipment, comply with the safety rules and regulations, prevent accidents.

2.Cutting machine work must be absorbed in mind, not only to keep clear headed, but also rational operation of electric tools.


3.The power supply line must be safe and reliable. The performance of the equipment must be carefully checked before use and ensure that the components are intact.

4. Wear appropriate work clothes, do not wear too loose work clothes, strictly prohibit wearing gloves and cuff buckle operation.

5.The workpiece must be firmly clamped, and it is strictly prohibited to start cutting when the workpiece is not tightly clamped.

6.It is strictly prohibited to grind the burrs of the workpiece on the surface of the grinding wheel to prevent the grinding wheel pieces from cracking.blob.png



7. When cutting, the operator must deviate from the front side of the grinding wheel and wear protective glasses.

8.Strictly prohibit the use of defective grinding wheels. When cutting, prevent Mars from splashing and keep away from flammable and explosive materials.

9. When clamping workpiece, it should be clamped firmly and firmly. The protective cover must be installed correctly. After clamping, it should be turned to air for inspection, no jitter and abnormal noise.

10.When changing the new cutting piece or grinding wheel halfway, do not push the locking nut too hard to prevent the saw blade or the grinding wheel piece from cracking. 


11.Shaking and other faults, should immediately stop repair, strictly prohibit sick and drunk operation, operation is strictly prohibited to wear gloves operation. If dust is caused during operation, mask should be put on.

12.After processing, power supply should be turned off and 5S requirements for equipment and surrounding venues should be well done.


Previous: Mechanical saw rail operation

Next: No Information