LQG-750 Li-Battery Rail Cutting Machine metro tunnel special rail saw

Scope of Application

LQG-750 Li-Battery Rail Cutting Machine metro tunnel special rail saw is suitable for cutting 60kg / m rail, and the cutting section quality meets the requirements of railway industry standard. It is the necessary equipment for railway maintenance department to overhaul, repair and rush repair. It has the advantages of fast cutting speed, low energy consumption, low noise, high cutting section quality, simple operation, easy to move, safe use and wide application.

Technical Parameters

1. Motor:

1) Power: 0.75 kw

2) Speed: 2880r / min

2. Band saw blade:

1) Spindle speed : 115r / min

2) Specification 19 * 0.9 * 1915

3. Cutting time: 60kg / m rail,≤120s

4. Use frequency of band saw blade: 60kg / m, use≥10 times

5. Total weight 48kg

Usage

1. Install the band saw blade: (check the band saw blade and make sure that the saw blade is facing the driving wheel)

(1) Rotate the hand wheel 1 counterclockwise to lower the tension wheel 2;

(2) Loosen handle 5 and clamp block 4;

(3) Insert the band saw blade 6 between the clamping blocks to the bottom;

(4) Tighten the handle 5 to lock the band saw blade 6;

(5) Press the rest of the band saw blade 6 to the outer edges of the three wheels and hold it down;

(6) Rotate the hand wheel 1 clockwise to make the tension wheel 2 rise, and tension the band saw blade: until the thumb pushes the back of the saw blade and the saw teeth do not move.

(7) Cover plate installation.

1. Motor:

1) Power:  0.75 kw

2) Speed: 2880r / min

2. Band saw blade:

1) Spindle speed :    115r / min

2) Specification   19 * 0.9 * 1915

3. Cutting time:       60kg / m rail,≤120s

4. Use frequency of band saw blade: 60kg / m, use≥10 times

5. Total weight   48kg

Hot Tags: LQG-750 Li-Battery Rail Cutting Machine metro tunnel special rail saw, China, manufacturers, suppliers, made in China